WH-VI-16 high frequency furnace

High frequency furnace of the use of 30KW and 16KW high frequency furnace shell in the same machine, industrial blue tones, paint does not touch ash, easy cleaning and maintenance.

The equipment panel is easy to operate, a display with time and temperature sensing. Can be more direct control, switch in front. Regulation only operation according to the Henan superFeng electrical manual debugging, simple, a school will.

30KW high frequency furnace used for screw heating, the small gear shaft heating, quenching and so on, the heating effect is stable, bring a lot of benefits to the customer, and the priceis low, many manufacturers.

Model WH-VI-30 high frequency furnace screw heating:：

30KW high frequency furnace screw heating

The device for a second heating can be a screw,greatly enhance the work efficiency.

Model WH-VI-30 high frequency furnace pinion and shaftquenching diagram:

The small gear shaft frequency quenching

Characteristics of induction coil, let the quenching is more uniform, faster. It only takes a few seconds to complete theheating.

Welding preparation: WH-VI-30KW high frequency weldingmachine, pressure instrumentation workpiece.

Solder: brazing powder, brazing sheet.

Welding process: open the high-frequency welding machine of water and electricity, to water power, open the panel power. Brazing sheet, copper powder on the weld, and then with the workpiece with into the sensor, step on the remote control switch, the start of heating. When the workpiece sheated to a certain temperature, brazing sheet melting,filling welding, welding.

WH-VI-30 high frequency welding machine Henan Chao Feng electrical welding performance characteristics:

1 using IGBT devices, a full bridge inverter, complete protection function, high reliability.

2 can be connected with the remote control and infrared temperature measurement, the realization of automatic control of temperature. To improve the heating quality and simplify the operation of workers.

3 replace the oxyacetylene flame, coke furnace, salt bath furnace, gas furnace, furnace heating mode.

4 the frequency automatic tracking and multi loop control,simple installation, convenient operation 。

Henan Chao Feng Electrical Equipment Co., Ltd. product model;

Model / configuration 30

The working power three-phase 380V/50HZ

Working voltage 342V-430V

The maximum input current 55A bus

The maximum output current of 30KVA

The oscillation frequency of 15-45KHZ

The efficiency of 90%

Load sustained rate of 100%

The cooling water flow rate 15Lmin (0.1mp)

Cooling water pressure 0.1-0.3mp

Host weight 45Kg

Transformer weight

Machine dimension 580*280*510

Transformer size

The host color blue / white

Transformer color

Special application field drill rod diathermy, bit welded small shaft

The water temperature at 50 ℃ protection

30KW high frequency welding machine:

1, the design of portable, compact, easy to use, mobileplace.

2, the operation panel easy manipulation, display a clear and comprehensive.

3, the inductor quick links, convenient replacement.