WH-VI-16 high frequency furnace

High frequency furnace of the use of 30KW and 16KW high frequency furnace shell in the same machine, industrial blue tones, paint does not touch ash, easy cleaning and maintenance.

The equipment panel is easy to operate, a display with time and temperature sensing. Can be more direct control, switch in front. Regulation only operation according to the Henan superFeng electrical manual debugging, simple, a school will.

30KW high frequency furnace used for screw heating, the small gear shaft heating, quenching and so on, the heating effect is stable, bring a lot of benefits to the customer, and the priceis low, many manufacturers.

Model WH-VI-30 high frequency furnace screw heating:：

30KW high frequency furnace screw heating

The device for a second heating can be a screw,greatly enhance the work efficiency.

Model WH-VI-30 high frequency furnace pinion and shaftquenching diagram:

The small gear shaft frequency quenching

Characteristics of induction coil, let the quenching is more uniform, faster. It only takes a few seconds to complete theheating.

36KW high frequency welding machine ultra high frequency application range front | inductionwelding machine:

Supply good quality high-frequency welding machinesuper Feng card various turning welding weldingwelding, milling, planing, all kinds of woodworking tool welding, various bits of welding, such as:geological drill, bit of oil, coal bit welding, can also be used for the shearer ruler welding, cuttingruler excavator welding, welding of diamond saw blade, hard alloy saw blade, cutting tool welding,application scope is quite widespread, welcome tovisit our company needs.

The main characteristics of the welding machine 36KWHenan Chao Feng electrical equipment limited company: high frequency power tools: than theelectron tube power 30%, than the thyristor medium frequency power 20%. stable performance: complete protection, no worries. Fast heating speed: without oxidation layer, small deformation. After welding,exquisite appearance, uniform heating, so there is no lack of welding and leakage solder joints. Our company is an old enterprise do high-frequencywelding, with rich experience, more than 20 years ofadvanced technology, equipment can be assured use.

Model / configuration 36

The working power three-phase 380V/50HZ

Working voltage 342V-430V

The maximum input current 55A bus

The maximum output current of 30KVA

The oscillation frequency of 15-45KHZ

The efficiency of 90%

Load sustained rate of 100%

The cooling water flow rate 15Lmin (0.1mp)

Cooling water pressure 0.1-0.3mp

Host weight 45Kg

Transformer weight

Machine dimension 580*280*510

Transformer size

The host color blue / white

Transformer color

Special application field drill rod diathermy, bitwelded small shaft

The water temperature at 50 ℃ protection