The device is still treated by split type, its appearance and the same 50KW machine, 80KW machinewas shorter than that of.

Compared with the 50KW machine, he used the IGBTchip 80KW to meet, so the power of the device isavailable from 50-80 according to the user control.This is the characteristics and advantages of the machine.

Its stable performance, fast heating speed, more suitable for multi workpiece using multiple types ofheating manufacturers. The price is very reasonable.

The device has been tested shaft surface quenching,quenching and spline shaft gear ring quenching etc,the device for quenching can perfect work. The following is the equipment test:

Model WH-VI-60 high frequency furnace shaft surface quenching:

In the treatment of the shaft surface quenchingtemperature instantly, up to 800 degrees, and its mode of operation is from top to bottom, a heating forming, heating speed is very fast.

Model WH-VI-60 high frequency quenching furnacespline shaft:

Gear quenching spline shaft, can make its wear-resisting degree increased, the service life is enhanced.

Model WH-VI-60 high frequency furnace gearperipheral quenching:

From the color can be seen on the matching of gearheating of the device, easy it need heating part dored, but no damage to any other site. Effect is obvious.

5 0KW machine as a small equipment, in order to simple operation, so the assignment is split form. On one side is the regulating button indicator device. The other part is as a working part, do sensor heating interface.

Compared to the 30KW machine, 50KW equipment is not so easy,range and advantages but heat treatment and expanded a lot,induction good metals, such as iron, 800 degree only takes a few seconds to aluminum heating.

So the model WH-VI-50 high frequency furnace often biggerrivet diathermy, small big gear ring heating work:

Large rivet diathermy:

Large rivet heating field

Henan Chao Feng electrical 50KW high-frequency machine advantages

Power saving: than the electron tube power 30%, than frequency power SCR 20%.

2, stable performance, full protection, no worries.

3, heating speed, no oxidation layer, small deformation.

4, small volume, light weight, convenient installation.

The 5, sensor isolation by transformer, safety.

6, environmental protection: no pollution, noise and dust.

7, strong adaptability to various: workpiece heating.

8, the temperature and the heating time can be controlled accurately, high machining quality.

Main application: this type is especially suitable for the heating field of forging, high strength bolt, nut diathermy forging. General parts diathermy forging and all kinds of automobile, motorcycle parts need diathermy forging, also can be used forsmall parts of the quenching, annealing.

Model / configuration 50

The working power three-phase 380V/50HZ

Working voltage 342V-430V

The maximum input current 75A bus

The maximum output current of 50KVA

The oscillation frequency of 15-35KHZ

The efficiency of 90%

Load sustained rate of 100%

The cooling water flow rate 20Lmin (0.1mp)

Cooling water pressure 0.1-0.3mp

Host weight 55kg

The weight of 35kg transformer

Machine dimension 590*450*780

Transformer size 420*335/450

The host color blue / white

Transformer color blue / white

Special applications standard hot pier, gear quenching

The water temperature at 50 ℃ protection