You are here:home > Company news > Pruduct's Detail
The three category selection guide of high frequency induction heating equipment
With the development of economy, the metal of high frequency induction heating industry make a spurt of progress, many
brands. Henan Chao Feng electrical equipment limited company as a member of the induction heating equipment manufacturers of them,we have the responsibility to processing industry to contribute their meager strength for the metal heat,ultra front experts today for selection this piecemake some elaborate, hoping to help you!!
A, welding equipment
The frequency of around 15Khz, Φ 80. Heat the workpiece, can weld various hard alloy cutter
Hot Heading 1, standard parts, fasteners.
2, rock drill, drill tempering, forging, extrusionand other heating.
3 diamond saw blade. Drill pipe welding.
The welding of 4 bit, coal drill bit, drill rod,pick liu.
The 5 tool, cutter, welding, milling cutter and all kinds of woodworking tool.
Two, the quenching equipment
The frequency of around 40Khz, small can quench Φ 10 high precision small shaft, hardened layer to keep 1m
In large, quenching of Φ 250 diameter shaft, can also be quenched Φ 500 gea
Quenching treatment 1, auto parts, motorcycle accessories.
Heat treatment 2, mechanical parts, such as gear,sprocket quenching treatment, all kinds of shaft,spline shaft, pin etc..
Quenching machine tool bed rail 3, the machine tool industry.
Heat treatment 4, pliers, wrenches, screwdrivers,hammers, axes and other.
Three, annealing equipment
The various parts of a whole or partial annealing.
Can be stretched annealing on Φ 300 diameter stainless steel container
High frequency furnace has been widely used in:fasteners, standard parts, auto parts, hardware tools, rigging, hemp flowers drilling hot, hot upsetting;
Principle: the diameter of the workpiece is larger,the lower frequency should be selected.
Such as the application of high frequency UHF Φ 4-16MM Φ 16-40mm suitable for high frequency, suitable for ultra audio frequen
Principle: the workpiece requirement hardened layeris shallow, the frequency should be higher. Such as:1mm, suitable for ultra high frequency 1.0-1.5mm,suitable for high frequency; 1.5-3.0mm, for superaudio
According to the selection of appropriate production efficiency power bigger, faster. The consulting company technical personnel
Heat treatment of shaft, gear, sprocket, machine tool accessories, metal wire annealing, hydraulic fittings, automobile fittings, clamp cutlery,stainless steel pot annealing
Combined with the comprehensive consideration of the shape of the workpiece, quenching, quenching hardness, hardened layer requirements and material,the specific technical advisory staff Henan ChaoFeng electrical equipment limited company 159-9369-2891.
Composite welding principle of different materials,tools, soldering bit reamer, milling cutter, drilland stainless steel pot: the bigger the welding, the frequency is reduced.
The volume is less than 30*30*30 tool, can use high frequency; according to the specific shape of the workpiece, material, such as solder circumstances.
High frequency heating melting gold, silver, copper,zinc, aluminum and other precious metal small capacity optional ultra audio frequency, high capacity medium frequency furnace and the production efficiency are optional according to specific anddefinite.